Skip to content

Cart

Your cart is empty

Shelly Wave Shutter

The Shelly Wave Shutter is a bi-directional Z-Wave controller for roller shutters and blinds, with power metering and venetian slat-angle control, rated 10 A. It joins a Z-Wave mesh as an 800-series repeater and needs a Z-Wave hub.
Sale price$30.99
SKU: OH-SHE-WAVESHUT

Needs a Z-Wave hub · For blinds and shutters · Electrician install


In stock · Ships in 1 to 2 business days

Shelly Wave Shutter
Shelly Wave Shutter Sale price$30.99
Built by engineers
Trusted by trade
Free shipping over $250
Australian owned and operated

Key features

✓

Bi-directional shutter and blind control: full open/close plus venetian slat-angle positioning.

✓

Power metering: watts and kWh reported per shutter circuit.

✓

10 A rated, 240 V: suits typical shutter, awning and blind motors.

✓

Z-Wave 800-series repeater: strengthens the mesh for other Z-Wave devices.

✓

Hub required: needs a Z-Wave controller on site, as with all Z-Wave devices.

Works with

Samsung SmartThings

Samsung SmartThings

Home Assistant

Home Assistant

Homey

Homey

Fibaro

Fibaro

HC3

Vera/Ezlo

Vera/Ezlo

Cozify

Cozify

Homee

Homee

Cube

About this product

The Shelly Wave Shutter drives roller shutters, awnings and blinds with full bi-directional motor control, including venetian slat-angle positioning. Tilt the slats to a set angle, not just fully open or closed. It's rated 10 A per channel with power metering (watts and kWh), and it repeats the Z-Wave signal for other mesh devices nearby.

Like every Z-Wave device, it needs a separate Z-Wave controller or hub already on the network, which is normal for the protocol, not a defect. Shelly names Home Assistant, Fibaro, Homey, SmartThings (via the Shelly Wave edge driver), Vera/Ezlo and Cozify as compatible gateway platforms, with full slat-position support on the strongest of those (Home Assistant, Fibaro, Homey, Vera/Ezlo, Cozify) and partial support (no slat reporting) on SmartThings and some Homee Cube configurations.

Model: QNSH-001P10AU

Install note

Shutter/blind motor wiring (up/down circuits, 230 V): licensed electrician required; a Z-Wave controller must already be present on site.

Tech specs

Physical
ModelQNSH-001P10AU
Dimensions37 × 42 × 16 mm, 29 g
Weight29 g
Electrical
Max load10 A per channel, 240 V AC
Power monitoringYes (W and kWh)
Operating temperature−20 to 40 °C
Compatibility
Compatibility notesRequires a Z-Wave controller/hub (not included). AU/NZ 919.8 MHz variant, part QNSH-001P10AU. Slat-angle reporting is not available on SmartThings.
In the box
What's in the box1 × Shelly Wave Shutter, quick start guide
Warranty
Manufacturer warranty3 Years
Free Ohmly extension+1 Year Free Ohmly Warranty

Downloads

Complete your setup